Remote Button Description; Use Mode - Sony HT-DDW750 Operating Instructions Manual

Remote Button Description
(continued)
Notes
• Some functions explained in this section may not
work depending on the model of the receiver.
• Tile above explanation is intended to sel_e as an
example only. There_re, depending on the
component the above operation may not be possible
or may operate differently than described,
• To activate the but_ns with orange printing, press
ALT firs! before pressing the buttons.
• Press MAIN MENU on the remote before you use
the t_/!-/_,/,_ bul_ns for _ceiver operation.
• Press TOP MENU/GUIDE or AV MENU on the
remote be fo,_ you use tile remote _ control lhe
satellite tuner, VCR and DVD player.
• The VIDEO3, TV/SAT, PHONO, AUX, MULTI
CH, SOURCE, DIRECT, AAC BI-LING,
SB DECODING, 12 and ON SCREEN functions
are not available for set operation.
Set the remote command mode using the USE
MODE button and the remote comm_md mode
buttons.
Selecting the command mode
You con switch the command mode (AVI or
AV2) of the remote. If the commaod mode of
the receiver and the remote is different, you
cannot use the remote to operate the receiver.
Press AV1 or AV2 while pressing down
USE MODE.
The indicator lights once (twice for AV2), then
the commaod mode switches.
To check the command mode of the
remote
Press USE MODE. You can check the remote
by the indicator.
Mode Indicator lights
AVI once
AV2 twice
To reset the remote to factory
settings
Press I/(_, AV I/(_, and MASTER VOL - at
the same time.
The indicator lights 3 times, then goes off.
You can program the remote to control non-
Sony components by changing the code. Once
the control signNs have been memorized, you
can use those components as part of your
system.
Furthermore, you can also progratn the remote
_br Sony components thai the remote is unable
to control. Note that the remote can only
control components thai accept infr_ed
wireless control signals.
1
P_ss AV I/_) while pressing down USE
MODE.
The indicator lights.
2
P_ss the input selector button
(including TV I/@) for the component
you want to control.
For example, if you we going to control _
CD player, press CD/SACD.
3
P_ess the numeric buttons to enter the
numeric code (or one of the codes if
more than one code exists)
corresponding to the component and
the maker of the component you want
to control.
See tbe tables on pages 41_43 for
information on the numeric code(s)
corresponding to the component and the
maker of the component (the first digit and
tbe last two digits of the numeric code
correspond to the category and tbe maker's
code respectively.)
4 P ess ENTER.
Once the numeric code has been verified,
tbe indicator slowly flashes twice and the
remote automatically exits the programming
mode.
40 G8