Speaker System Hookup - Sony STR-DE545 Operating Instructions Manual

Speaker System Hookup
Required cords
Speakercords(not supplied)
One for each front, rear, and ce_lter speaker
(+)
(-)
Monaural audio cord (not supplied)
One for an active woofer
**IMPEDANCE
SELECTOR
Front speaker (R) Front speaker (L)
* FRONT
SPEAKERS B
8
c
eL
u_
th
"1=
¢D
fD
t_
i<:
@
Active sub woofer Rear speaker (R)
Terminals for
connecting the speakers
Connect the To the
Front speakers (8 or 4** ohm) SPEAKERS FRONT A terminals
*Additional pair of front SPEAKERS FRONT B terminals
speakers (8 or 4** ohm)
Rear speakers (8 ohm) SPEAKERS REAR terminals
Center speaker (8 ohm) SPEAKERS CENTER terminals
Active sub woofer SUB WOOFER AUDIO OUT jack
@
Rear speaker (L)
@
Center speaker
* STR-DE545and STR-SE501 only.
** See "Speaker impedance" on the next page.
Notes on speaker system hookup
• Twist the stripped ends of the speaker cords about 2/3
inch (10 ram). Be sure to match the speaker cord to the
appropriate terminal on the components: + to + and -
to -. If the cords are reversed, the sound will be
distorted and will lack bass.
• If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid excessive
output on the speakers.
• You can also connect Micro Satellite Speaker (e.g.
SA-VE230) to the receiven Micro Satellite Speaker is a
5.1 Channel speaker system consisting of two front
speakers, two rear speakers, one center speaker and one
subwoofen
13