Speaker System Hookup - Sony STR-DA5ES Operating Instructions Manual

Speaker system hookup (continued)
Another room hookups
You can connect the speakers to use in another room to the SPEARERS 3RD ROOM jacks
(STR-DASES) or the SPEAKERS 2ND ROOM jacks (STR-DA3ES). Make sure to connect correctly
as indicated on the rear panel.
3rd or 2nd room
3rd or 2nd room
speaker(R)
speaker(L)
Speaker impedance
To enjoy multi channel surround, connect front,
center, surround, and surround back speakers
with a nominal impedance of 8 ohms or higher,
and set the IMPEDANCE SELECTOR to
"8W. Check the operating instructions
supplied with your speakers if you're not sure
of their impedance. (This information is
usually printed on a label on the back of the
speaker.)
You may connect a pair of speakers with a
nominal impedance between 4 and 8 ohms to
all of the speaker terminals. However, even if
one speaker within this range is connected, set
the IMPEDANCE SELECTOR to "467.
Note
Be sure to turn the power off when setting the
IMPEDANCE SELECTOR.