Recording - Sony STR-DE545 Operating Instructions Manual
Hide thumbs
Also See for STR-DE545:
- Operating instructions manual (149 pages) ,
- Manual de instruções (52 pages) ,
- Service manual (48 pages)
Table of Contents
Advertisement
O
¢a
,q
O
"o
Q
o
Naming
Preset Stations
and
Program
Sources
You can enter a name (index name) of up to 8 characters
for preset stations
and program
sources. These names (for
example,
"VHS") appear
in the receiver's
display
when a
station
or program
source is selected.
Note that no more than one name can be entered
for each
preset station
or program
source.
This function
is useful
for distinguishing
components
of
the same kind. For example,
two VCRs can be specified
as
"VHS" and "8MM", respectively.
It is also handy
for
identifying
components
connected
to jacks meant for
another
type of component,
for example,
a second CD
player connected
to the MD/TAPE
jacks.
1
To name a preset station
Press TUNER.
The last station you received is tuned in.
2
3
To name a program
source
Seiect the program source (component)
to be
named, then go to Step 3.
Tune in the preset station you want to create an
index name for.
If you are not familiar with how to tune in preset
stations,
see "Tuning
to preset stations"
on page 40.
Press NAME.
4
Create an index name by using the jog dial and
cursor buttons:
Turn the jog dial to select a character,
then press _ to
move the cursor to the next position.
To insert a space
Turn the jog dial until a blank space appears
in the
display
(you can find the space character
between
"]"
and "A").
If you've
made a mistake
Press _ or _, repeatedly
until the character
to be
changed
flashes, then turn the jog dial to select the
right characten
5
Press ENTER.
To assign index names
to other stations
Repeat Steps 2 to 5.
Recording
Your receiver makes it easy to record
to and from the
components
connected
to it. You don't have to connect the
playback
and recording
components
directly
to each
other: once you select a program
source on the receiver,
you can record and edit as you normally
would
using the
controls on each component.
Before you begin, make sure you've connected
all
components
properly.
tion buttons
Playback component
Recordingcomponent
(pro_lram source)
(tape deck, MD deck,
VCR)
_:
Audio signal flow
•._:
Video signal flow
Recording
on an audio
tape
or MiniDisc
You can record on a cassette tape or MiniDisc
using the
receiver. Refer to the instruction
manual
of your cassette
deck or MD deck if you need help.
1
Select the component to be recorded.
2
Prepare the component for playing.
For example,
insert a CD into the CD player.
3
Insert a blank tape or MD into the recording deck
and adjust the recording level, if necessary.
4
Start recording on the recording deck, then start
playback on the playback component.
Notes
• You cannot record a digital audio signal using a component
connected
to the analog MD/TAPE
REC OUT jacks.
• Sound adjustments
do not affect the signal output
from the
MD/TAPE
REC OUT jacks.
Page 42
Hide quick links:
Advertisement
Table of Contents
