Sony STR-DE545 Operating Instructions Manual page 53

1
2
Hold down the Function button whose function you
want to change (for example, MD/TAPE).
Press the corresponding button of the component
you want to assign to the Function button (for
example, 1 - CD player).
The following buttons are assigned to select the functions:
To operate Press
CD player 1
DAT deck 2
MD deck 3
Tape deck A 4
Tape deck B 5
LD player 6
VCR (remote control mode VTR 1") 7
VCR (remote control mode VTR 2*) 8
VCR (remote control mode VTR 3*) 9
"IV 0
DSS (Digital Satellite Receiver) > 10
DVD ENTER
VCD player
* Sony VCRs are operated with a VTR 1, 2 or 3 setting.
These correspond to Beta, 8mm and VHS respectively.
Now you can use the MD/TAPE button to control a
second CD player.
To change the AUX function to another function
Hold down SLEEP and press the corresponding button of the
component you want to assign it to.
To change the 5.1 CH function to another function
Hold down AV I/(_) and press the corresponding button of the
component you want to assign it to.
To reset a button to its factory setting
Repeatthe above procedure.
TO reset all the function buttons to their factory setting
Press I/(_, AV I/(._ and MASTER VOL- at the same time.
Q.
O
$3