Step 6: Setting The Date And Time - Sony HANDYCAM DCR-DVD705 Operating Manual

Step 6: Setting the date and time
Set the date and time when using this
camcorder for the first time. If you do not set
the date and time. the [CLOCK SET] screen
appears every time you tUrll on your
camcorder or slide the POWER switch.
• If you do not use your camcorder Ibr about 3
months, the built-in rechmgeable battcl T gets
discharged and the dale and lime settings may be
cleared hom tile memory. In flint case. charge the
mchalgeable balt el3'and thin1 scl lhe dale and lilne
again (p.141).
POWER switch
E-MN_
Skip to step 4 when you set Ihe clock for lhe
first lime.
1
Touch _ --+ [SETUP].
Jl
2
Select <_ (TIME/LANGU.)with
V27/1_7, then touch 1_71.
4
Select the desired geographical
area with 1_7/1_7, then touch [_.
5 Set [DST] or [SUMMERTIME] to
[ON] with 1_7/1_7, if necessary,
then touch I_gl.
6
Set [Y] (year) with _/1_7, then
touch Iogl.
• You can sel any year up m file year 2079.
7
Set [M] (month), [D] (day), hourand
minute, then touch IB_].
The clock starts.
For midnight, set it to 12:00 AM.
For midday, set it to 12:00 PM.
• Relcr 1o page 133 Rtr inli)rmalion concerning
'World lime difli_rcnce."
• The recording datc and time arc nol displayed
during recording, but arc automatically recorded
onlo the disc and you can check lhenl during
playback/[DATA CODEI. p.82).
• lnslead of [DSTI, IS UMMERTIMEI is displayed
lot sortie nlodels,
3
Select [CLOCK SET] with 1_7/1_7,
then touch Ira.
28