Troubleshooting - Sony HANDYCAM DCR-DVD705 Operating Manual

Hide thumbs Also See for HANDYCAM DCR-DVD705:
Table of Contents

Advertisement

Tm@/esboo#_g
Troubleshooting
If you run into any problems using your camcorder, use the following table to
troubleshoot the problem. If the problem persists, remove the power source and
contact your Sony dealer.
The camcorder does not operate even when the power is set to on.
Disconnect the AC
Adaptor
from the _all outlet or remove the
battery
pack,
then reconnect it
afler about 1 minute, lfthe fimctions still do not work_ press the RESET button (p.49) using a
sharp-pointed ohject, llf you press the RESET buttom all settings, including the clock setting,
are reseL except the Personal Menu items.)
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
Buttons do not work.
• During Easy Handycam operation, the available buttons arc limited. Cancel Easy Handycam
operation (p.34).
You cannot turn Easy Handycam operation on or off.
• You cannot turn Easy Handycam operation on or off while recording or communicating with
another device via USB cable/For DCR-DVD305/DVD755 ). Cancel Easy Handycam
operation (p.34).
Settings change during Easy Handycam
operation.
• Some of the settings of your camcorder arc restored to the default setting when you set Easy
Handycam operation 1p.34).
[DEMO MODE] does not start.
• You cannot vic_ the demonstration when Ihc NIGHTSHOT PLUS switch is set to ON. Set the
NIGHTSHOT PLUS switch to OFF (p.47).
• Remove the disc and"Memory Stick Duo" lFor DCR-DVD305/DV D755) from your c amcorder
(p.30,31).
• Set the POWER switch to _
(Movie).
Your camcorder vibrates.
• Vibration occurs depending on the condition of the disc. This is not a malfimction.
A vibration is felt in your hand or a faint sound is heard during operation.
• This is not a malfunction.
A motor sound is heard from your camcorder periodically.
• This is not a malfunction.
A motor sound is heard in the camcorder when the disc cover is closed without
a disc.
• Your calncorder recognizes the disc. This is not a malfunction.
g-
109

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents