Figure - Grizzly EXTREME G0605X Owner's Manual

Always use push sticks, featherboards,
push paddles and other safety accessories
whenever possible to increase safety and
control during operations which require
that the blade guard and splitter must be
removed from the saw. ALWAYS replace the
blade guard after dadoing is complete.
5.
OFF
6.

Figure 51.

The danger of kickback increases relative
to the depth and width of a cut. Reduce the
risk of kickback by making multiple passes
to achieve the desired depth of cut. Failure
to follow these warnings could result in seri-
ous personal injury.
7.
ON
8.
9.
ON
Figure 51
To cut rabbets with the standard blade:
Note: Cutting rabbets with a standard saw blade
DOES NOT require the use of a sacrificial fence.
Note: Reduce motor overloading and blade wear
by using a ripping blade. Ripping blades are
designed to clear the sawdust quickly.
1.
2.
3.
Note: Include marks on the edge of the
workpiece to clearly identify the intended cut
while it is laying flat on the saw table.
4.
The danger of kickback increases relative to
the depth of a cut. Reduce the risk of kick-
back by making multiple passes to achieve
the desired depth of cut. Failure to follow
these warnings could result in serious per-
sonal injury.
5.
Figure 52
Figure 52.