Table of Contents
Advertisement
For Your Own Safety Read Instruction
Manual Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible dangers. This manual uses
a series of symbols which are intended to convey the level of criticality of the safety message.
The progression of symbols is described below. Remember that safety messages by themselves
do not eliminate danger and are not a substitute for proper accident prevention measures.
NOTICE
Safety Instructions For Power Tools
1.
KEEP GUARDS IN PLACE and in working
order.
2.
REMOVE
ADJUSTING
WRENCHES. Form habit of checking to
see that keys and adjusting wrenches are
removed from tool before turning on.
3.
KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
4.
DON'T USE IN DANGEROUS ENVIRON-
MENT. Don't use power tools in damp or
wet locations, or where any flammable or
noxious fumes may exist. Keep work area
well lighted.
G1012 18" Bandsaw
SECTION 1: SAFETY
This symbol is used to alert the user to useful information about
proper operation of the equipment.
Failure to obey a CAUTION symbol and notation may result in
minor or moderate property damage or personal injury.
Failure to obey a WARNING symbol and notation can result in
serious injury to yourself and others.
Failure to obey a DANGER symbol and notation WILL result in
serious personal injury including loss of life or body parts.
KEYS
5.
KEEP CHILDREN AND VISITORS AWAY.
All children and visitors should be kept a
safe distance from work area.
AND
6.
MAKE WORK SHOP CHILD PROOF with
padlocks, master switches, or by removing
starter keys.
7.
DON'T FORCE TOOL. It will do the job bet-
ter and safer at the rate for which it was
designed.
8.
USE RIGHT TOOL. Don't force tool or
attachment to do a job for which it was not
designed.
-3-
Advertisement
Table of Contents
