Section 6: Maintenance - Grizzly t10493 Owner's Manual

section 6: maintenance

eye inJury hazard!
Wear safety goggles with full eye
protection from all sides when
using or servicing this grinder.
Wear protective
equipment when
using this tool.
disconnect power
before service or
wheel changes.
never exceed rpm
rating for wheels.
t10493, t10494 & t10495 (Mfg since 10/11)
lung/ear
inJury hazard!
accidental
start hazard!
Wheel shatter
hazard!
regular maintenance
these procedures should be done
before and after each use:
• Check the wheel before each use to
ensure no cracks and chips are present,
and that wheel size is sufficient to
safely grind.
Note: To avoid property damage,
the size of the wheel should be
large enough to prevent the outer
flange from coming into contact with
the workpiece in a typical grind-
ing operation.
• outer flange is tight and wheel is
secure.
• handle and guard are in proper position
and firmly attached to the grinder.
• For Models t10494 and t10495,
ensure that the trigger safety button is
in proper working condition.
• For Model t10493, ensure that on/
oFF locking slide switch is in proper
working condition.
-13
-