Choosing A Connection; Chapter 2: Connections Choosing A Connection - Samsung DVD-HD850 User Manual

CONNECTION
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any
cables.
- Refer to the user's manual of the additional components (such as a TV) you are connecting for
more information on those particular components.
Connection to a TV (Video)
1
Usingviaeo/aualo cables,connectthe VIDEO(yellow)/AUDIO
(red andwhite) OUTterminaIs on the rearof the DVDplayerto
the VIDEO(yellow)/AUDIO (red and white) IN terminalsof
yourTV.
Turn on the DVD player and TV
Press _ne m[}ut seIector on your TV remote comrot until the
Video signal from the DVD #ayer appears on the TV screen,
Note
-Noise may be generated if the audio cable placed too close to the power Cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The number and position of terminals may vary depending on your TV set. Please refer to the user's manual
of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][lefl] (white) terminal of the DVD
player.
- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (COMPOSITE/S-VIDEO _ COMPONENT(I-SCAN)
HDMI/COMPON ENT(P-SCAN))
- When the Video Output in Setup menu is set to HDMI/COMPONENT(P-SCAN), the Video and S-Video
Outputs do not work.
ENG-12