Samsung DVD-HD850 User Manual page 15

I
CONNECTION
I
Connection to a TV (Progressive)
1
Using component video cables mo_[ i ncluded), connect the
COMPONENT VIDEO OUT terminals on [ne rear of the DVD
3Iayer to the COMPONENT IN terminais of your TV,
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO [red
and white) IN terminais of your TV.
Turnon the DVD player ana TV.
3
Press the inpu[ selector on your TV remote controt untit the
Combonem signal from the DVD player appears on the TV
screen.
Set the Video Outout to HDMI/COMPONENT (P-SCAN) in the
Disslay Setup menu. (See pages 50 to 52)
You can use the VIDEO SEL. button to change the Video
Outout mode. (See page 12"_
To see the progressive video output,
' Consult your TV User s Manual to find out if your TV supports Progressive Scan. If Progressive
Depending on your TV, the connection method may differ from the illustration above,
Note
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
Progressive scanning method provides better and clearer picture quality.
ENG-15