Samsung DVD-HD850 User Manual page 14

CONNECTION
Connection to a TV (Interlace)
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates
the picture element into black and white(Y), blue(PB), red(PR)signals to present clear and clean
images. (Audio signals are delivered through the audio output.)
1
Using comaonent video cables inol mcluaeaL connect the
COMPONENT VIDEO OUT terminals on the 'ear of the DVD
player to the COMPONENT IN terminals of your TV.
2
Using me auaio cables, connect the AUDIO [red and white)
OUT terminais on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV
3
Press the mDulseiector on your TV remote control until the
Comuonem s_gnatfrom the DVD pla_er appears on the TV
screen.
4
Set the Video Outbut to Component (I-SCAN) in the Display
Setup menu. (See pages 50 to 52i
You can use the VIDEO SEL. button to chance the Video
Output mode. (See page 12)
Note
, If Video output is incorrectly set to s-Video with the ComPonent Cables Connected, the screen will
turn red.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The component terminal of your TV may be marked "R-Y, B-Y, Y" or "Cr, Cb, Y" instead of "PR, PB,Y"
depending on the manufacturer. The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
ENG-14