Tour Of The Remote Control; Choosing A Connection - Samsung DVD-C450 User Manual

Tour of the Remote Control

1. DVD POWER Button
DVD-C450
Turns the power on or off.
2. REPEAT Button
Allows you to repeat play a title,
chapter, track, or disc.
3. DISC MENU Button
12
1
Brings up the Disc menu.
13
2
4. BOOKMARK
14
3
Quickly find bookmark sections
15
4
of a DVD.
5
16
6
5. SEARCH Buttons (
7
Allow you to search forward/
17
8 backward through a disc.
18
6. STOP Button (
9
7. SKIP Buttons (
10
19
Use to skip the title, chapter
11
20
or track
8. MENU Button
Brings up the DVD player's
menu.
9. ENTER /π/†,√/® Buttons
This button functions as a
toggle switch.
DVD-C350
1. DVD POWER Button
Turns the power on or off.
2. REPEAT Button
Allows you to repeat play a title,
chapter, track, or disc.
3. DISC MENU Button
Brings up the Disc menu.
1
11
4. BOOKMARK
2
12
13
3 Quickly find bookmark sections of
14
4
a DVD.
15
5. STOP Button (
5
16
6 6. SKIP Buttons (
17
Use to skip the title, chapter or
7
18
track
8
7. MENU Button
9
19
Brings up the DVD player's
menu.
10
20
8. ENTER/π/†,√/® Buttons
This button functions as a
toggle switch.
9. AUDIO Button (√)
Use this button to access various
audio functions on a disc.
10. INFO Button
4
10. AUDIO Button (√)
Use this button to access vari-
ous audio functions on a disc.
11. INFO Button
Displays the current disc mode.
12. OPEN/CLOSE ( ) Button
To open and close the disc
tray.
13. REPEAT A-B Button
Allows you to repeat A-B disc.
/ ) 14. USB Button
15. VIDEO SEL. Button
Selects video output formats.
) 16. PLAY/PAUSE Button (
/ )
Begin/Pause disc play.
17. SUBTITLE Button (π)
18. RETURN Button
Returns to a previous menu.
19. TITLE MENU Button (®)
Brings up the Title menu.
20. CANCEL Button
Use to remove menus or status
displays from the screen.
Displays the current disc
mode.
11. OPEN/CLOSE ( ) Button
To open and close the disc
tray.
12. REPEAT A-B Button
Allows you to repeat A-B disc.
13. ZOOM Button
Enlarges the DVD Picture.
14. VIDEO SEL. Button
)
Selects video output formats.
/ ) 15. SEARCH Buttons (
Allow you to search forward/
back ward through a disc.
16. PLAY/PAUSE Button (
Begin/Pause disc play.
17. SUBTITLE Button (π)
18. RETURN Button
Returns to a previous menu.
19. TITLE MENU Button (®)
Brings up the Title menu.
20. CANCEL Button
Use to remove menus or sta
tus displays from the screen.
Connections

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect
any cables.
- Refer to the user's manual of the additional components you are connecting for more informa-
tion on those particular components.
A. Connecting to a TV (SCART)
- Using Scart cable, connect to SCART terminal on the rear of the DVD player to the SCART IN
terminals of TV.
)
- Turn on the DVD player and TV.
- Press the input selector on your TV remote control until the Video signal from the DVD player
appears on the TV screen.
B. Connecting to a TV (VIDEO CVBS)
- Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals
on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.
- Turn on the DVD player and TV.
- Press the input selector on your TV remote control until the Video signal from the DVD player
appears on the TV screen.
Note
- Noise may be generated if the audio cable is too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page.
- The number and position of terminals can vary depending on your TV set.
Please refer to the user's manual of the TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal
of the DVD player.
- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the
Video Output mode changes in the following sequence: (SCART-CVBS ➝ I-SCAN ➝ P-SCAN ➝
SCART-RGB).
/ )
C. Connection to an Audio System (2 Channel Amplifier, Dolby
Digital,MPEG2 or DTS Amplifier)
)
- Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the
DVD player to the AUDIO (red and white) IN terminals of the Amplifier.
- If Using the video signal cable(s), connect the VIDEO terminals on the rear of the DVD player
to the VIDEO terminal of your TV, If using a coaxial cable, connect the DIGITAL AUDIO OUT
(COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) termi-
nal of the Amplifier.
- Turn on the DVD player, TV, and Amplifier.
- Press the input select button of the Amplifier to select external input in order to hear sound
from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's audio input.