Samsung DVD-HD850 User Manual page 10

Hide thumbs Also See for DVD-HD850:
Table of Contents

Advertisement

I
SETUP
I
Rear
Panel
1
3
4
5
1.
DIGITAL
AUDIO
OUT
JACKS
- Use either an optical or coaxial digital cable to connect
to a compatible Dolby Digital receiver.
- Use either an optical or coaxial digital cable to connect
to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
2.
COMPONENT
VIDEO
OUT
JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide PR,PBand Y video.
- If Component(P-SCAN) Video Output is selected in
Setup Menu, progressive scan mode will work.
- If Component(I-SCAN) Video Output is selected in
Setup Menu, interlaced scan mode will work.
3.
AUDIO
OUT
JACKS
Connect to the Audio input jacks of your television or
audio/video receiver
4.
VIDEO
OUT
JACK
- Use a video cable to connect to the Video input jack on
your television.
- The Video Output in Setup Menu must be set to
COMPOSITE/S-VIDEO.
5.
S-VIDEO
OUT
JACK
- Use the S-Video cable to connect this jack to the
S-Video jack on your television for higher picture
quality.
- The Video Output in Setup Menu must be set to
COMPOSITE/S-VIDEO.
6.
HDMI
OUT
JACK
- Use the HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
If an HDMI cable is connected to an HDMI-compatible
TV, HDMI will be output automatically a maximum of 10
seconds later.
If you want to use a Video, S-Video or Component
Output, unplug HDMI cable.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in the
TV's menu system.
- If HDMI/COMPONENT (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do
not work.
- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion
adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.
- There may be no image output if the DVD player is connected to a TV or display that is not compatible with
the above format.
- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.
- See pages 50 ~ 52 to get more information on how to use the setup menu.
ENG-10

Advertisement

Table of Contents
loading

Table of Contents