Troubleshooting - Samsung DVD-HD850 User Manual

I
REFERENCE
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Problem Action Page
No operations can be • Check the batteries in the remote control
performed with the They may need replacing,
remote control, • Operate the remote control at a distance of no more than 20 feet,
• Remove batteries and hold down one or more buttons for several minutes to P5
drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play. • Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD P8
5.1 channel sound is • 5.1 channel sound is reproduced only when the following conditions are met. :
not being reproduced. 1) The DVD player is connected with the proper Amplifier P19
2) The disc is recorded with 5.t channel sound.
• Check whether the disc being played has the "5.1 ch" mark on the outside.
• Check if your audio system is connected and working properly. P48_49
• In a SETUP Menu, is the Audio Output set to Bitstream?
The _) icon appears • The features or action cannot be completed at this time because:
on screen. 1. The DVD's software restricts it.
2. The DVD's softwaredoesn'tsupportthe feature (e.g., angles).
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that is out of range.
DiscMenudoesn'tappear. • Check if the disc has a Menu.
Playmode differs from • Some of the functions selected in the Setup Menu may not work properly if the
the Setup Menu disc is not encoded with the corresponding function. P43_55
selection.
The screen ratio • The Screen Ratio is fixed on your DVDs. P50~5t
cannot be changed.
No audio. • Make sure you have selected the correct Digital Output in the Audio Options P48~49
Menu.
The screen is blocked • Press the _ button for more than 5 seconds under no disc inside. All settings P20
will revert to the factory settings.
Forgot password • Press the ,J..I button for more than 5 seconds under no disc inside.
All settings including the password will revert to the factory settings. Don't use P53_55
this untess absolutely necessary.
If you experience other • Go to the contents and find the section of the instruction book that contains
problems, the explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest authorized
service center.
The picture is noisy or • Make sure that the disc is not dirty or scratched.
distorted • Clean the disc. P4
iiiiiiiiiiiiii
ENG-57