Samsung DVD-HD850 User Manual page 19

I
CONNECTION
I
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using an optical cable (not inctuaeoL connect the DIGITAL
AUDIO OUT [OPTICAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (OPTICAL) terminat of the Amplifier.
If using a coaxial cabie fnot includedL connect the DIGITAL
AUDIO OUT [COAXIAL) terminat on the rear of the DVD player
to the DIGITAL AUDIO IN (COAXIAL) terminat of the AmeIifier.
Using the video signal cablefs'_,connect the VIDEO. S-VIDEO.
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO. COMPONENT or DVI IN
terminals of your TV as describee on pages 12 to 16
3
Turn on the DVD piayer, TV, anu AmeIifier.
Dolby digital or
OTS amp
4
Press the input select button of the Amplifier to setec_external
input in cruet to near sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
aualo lnou[.
Note
- When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio
Setup menu. If it is set to Off, sound will not be heard, or there wi I be a loud sound.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 48 to 49)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable
again when it's not used.
ENG-19