Power On Sequence; Special Setup Precaution - Euphonix R-1 Remote Manual

Power On Sequence

The Remote can be powered up at any time during the R-1 power on sequence. All
the keys will flash briefly. The Remote Display will read 'Waiting for Pilot' until the R-
1 software application is started. The software version number will show briefly in
the Remote Display. The Remote can also be powered on at any time after the R-1
application software is booted.

Special Setup Precaution

Care should be taken that all connections at the Remote wire tray and the Pilot
computer are secure. Once the cable has been attached, complete the connection by
tightening the securing screws on the cable connector or terminator, or use strain
reliefs where applicable. Particularly in a stand mounted Remote installation where
the Remote will be moved frequently, it is important that connections at the wire
tray are secured to prevent accidental dislodging.
Remote Manual Page 14
©1999 Euphonix, Inc.