Linksys 4116 - EtherFast Switch User Manual page 73

Chapter 1 Using the Cisco Multicast Manager
To draw a graphical tree between two particular routers:
FHR—Select the first hop router that the trace should start under.
•
LHR—Select the last hop router that the trace should end under.
•
Click Trace. The CMM draws a tree of the source and group selected from the router in FHR to the
•
router in LHR.
View the list of active sources and groups:
Group—Lists all active groups. To draw a multicast tree, click on a group. A new page appears with
•
the multicast tree in tabular and graphical format. Routers known as RPs to the source router appear
green.
Note
Figure 1-46
To save the multicast tree as a baseline, enter a name within Trace File, and click Save As. The
•
window closes. You can use the saved baseline for tree polling (see the
page
Note
OL-7348-01
If there is more than one source for the group, click on Sources under Number of Sources and
select the source you want to draw the tree from.
Drawing a Multicast Tree (Baseline)
1-38).
You can also save the tree as a .jpeg, .bmp, or .png file by right-clicking on it.
Using the Multicast Manager Tool
"Tree Polling" section on
User Guide for the Cisco Multicast Manager 2.3.3
1-63