Linksys 4116 - EtherFast Switch User Manual page 34

Using the Administration Tool
Figure 1-13
The Global Polling Configuration page contains:
Setting any one of these values to be less than 1 disables that specific polling feature.
Note
Field or Button
Refresh Status
Start
Stop
Restart
Default Run Times—Use Defaults
DR Polling Interval
Layer 2 Polling Interval
User Guide for the Cisco Multicast Manager 2.3.3
1-24
Global Polling Configuration
Chapter 1 Using the Cisco Multicast Manager
Description
The status line indicates how long the polling
daemon has been running and how it was started.
Click Refresh Status to update the status
information.
Starts the polling daemon globally.
Stops the polling daemon globally.
Restarts the polling daemon globally. Each time
you change a polling interval, click Restart.
Selecting the Use Defaults checkbox sets all the
start/stop times and days to the default values.
Checks the status of all DRs in the network. If a
user changes a DR, an SNMP trap is sent.
Amount of time between polling of the Layer 2
ports.
OL-7348-01