Linksys 4116 - EtherFast Switch User Manual page 50

Using the Administration Tool
Trees to be Polled
Using the Trees to be Polled table, you can:
•
•
Figure 1-24
•
Note
•
User Guide for the Cisco Multicast Manager 2.3.3
1-40
View tree details and topology by clicking on a tree name under Baseline
Monitor for S,G (PPS) when a tree is polled, and generate SNMP traps for Max Delta deviations by
clicking on Configure under Monitor PPS.
Tree Polling Configuration—Configure
Select a router(s) and specify a value in Max Delta Between PPS Samples, then click Set. To
remove a router from monitoring, select the router and click Remove. You can also return to the
main Tree Polling Configuration page.
You can select multiple routers by holding down the Ctrl key.
Remove a tree by clicking on Delete under Remove
Chapter 1 Using the Cisco Multicast Manager
OL-7348-01