Table of Contents
Advertisement
Chapter 1
Using the Cisco Multicast Manager
Figure 1-4
Step 3
Next to Management Domain, select the domain you want to discover (only domains that are created
from the System Configuration window appear here). If you select a different domain from the default,
you must complete steps 1 and 2 again.
Complete the fields in the Discover Multicast Domain pane (see field descriptions below) and click
Step 4
Start Discovery to continue. As routers are discovered, they appear in the browser window.
Step 5
(Optional) To view discovery progress as it is running, click Refresh Status.
Note
The Discover Multicast Domain pane of the Multicast Discovery page contains:
Field
Management Domain
Seed Router
OL-7348-01
Multicast Discovery
For details on adding or re-discovering a single device, see the
Single Device" section on page
1-14.
Description
(Read-only) Lists the selected management
domain.
Enter the IP address of the seed router to initiate
discovery from. If you enabled DNS when
configuring the domain, enter a name.
User Guide for the Cisco Multicast Manager 2.3.3
Using the Administration Tool
"Adding or Re-discovering a
1-13
Advertisement
Chapters
Table of Contents
