Linksys 4116 - EtherFast Switch User Manual page 40

Using the Administration Tool
Fields and Buttons
RP Monitoring
RPs Being Monitored
Single S, G Monitoring
User Guide for the Cisco Multicast Manager 2.3.3
1-30
Chapter 1 Using the Cisco Multicast Manager
Description
To monitor an RP, select the RP from the box.
To monitor a specific number of groups, enter a
number in the Group Limit box.
Click Monitor RP.
If the group limit is exceeded, a report is
generated within the RP Group Threshold Report
page (see the "RP Group Threshold Report"
section on page 1-50).
Lists:
RP—The name of the RP being monitored
•
Group Limit—Number of groups being
•
monitored for that RP.
• Accept-List—Monitors the sources and
groups active on the RP (see the
List Configuration" section on page
Remove—Deletes the RP.
•
Enter the group IP address. If more than one
source becomes active for this group, a report is
generated.
"RP Accept
1-31).
OL-7348-01