Linksys 4116 - EtherFast Switch User Manual page 44

Using the Administration Tool
Figure 1-19
The SG Polling Configuration page contains:
Fields and Buttons
Refresh Status
Start
Stop
Restart
Source
Filter Groups
Group
Filter Sources
Reset SG Lists
Select Routers
User Guide for the Cisco Multicast Manager 2.3.3
1-34
SG Polling Configuration
Chapter 1 Using the Cisco Multicast Manager
Description
The status line indicates how long the polling
daemon has been running and how it was started.
Click Refresh Status to update the status
information.
Starts the polling daemon globally.
Stops the polling daemon globally.
Restarts the polling daemon globally. Each time
you change a polling interval, click Restart.
Enter or select the IP address of the source to
monitor.
Filters the output to contain only the relevant
groups.
Enter or select the IP address of the group to
monitor.
Filters the output to contain only the relevant
sources.
Clears any entries and refreshes the source and
group lists.
Enter the router name.
OL-7348-01