Linksys 4116 - EtherFast Switch User Manual page 45

Chapter 1 Using the Cisco Multicast Manager
Fields and Buttons
Units
High Threshold
Low Threshold
Apply
Refresh Cache
Display Filter Options
Display Configured SGs
Current Source/Group Polling Configuration
The Current Source/Group Polling Configuration section displays all the sources and groups you are
currently monitoring.
Figure 1-20
OL-7348-01
Current Source/Group Polling Configuration
Using the Administration Tool
Description
Select either packets per sampling period (pps) or
bits per sampling period (bps).
Enter the high threshold that, if exceeded,
generates a report.
Enter the low threshold that, if exceeded,
generates a report.
Applies and saves the changes.
If you are using S,G caching, the cache contents
appear. Click Refresh Cache to refresh the table
of sources and groups.
You can filter the list of monitored sources and
groups by limiting to source, group, and/or router.
Displays all the sources and groups you are
currently monitoring (see the
Source/Group Polling Configuration" section on
page 1-35).
User Guide for the Cisco Multicast Manager 2.3.3
"Current
1-35