Linksys 4116 - EtherFast Switch User Manual page 32

Using the Administration Tool
To select a template and initiate validation:
Before you can initiate validation, TFTP must be enabled on the server, and the SNMP read-write
Note
community string must be configured in the CMM.
Under the Device Configuration menu, click Validate All Configs. The Configuration Check page
Step 1
opens.
Ensure the correct Management Domain is selected.
Step 2
Step 3 If you want to upload a user-defined template:
Click Browse. Open the text (.txt) file you created.
a.
Click Upload. The user-defined text file appears in the list below.
b.
Select the template you want to use from the list.
Step 4
(Optional) Click View to see the contents of each template.
Step 5
Click Check.
Step 6
Figure 1-11
The CMM checks each router in the database for the existence of the commands in the template you
specified. Output looks similar to
User Guide for the Cisco Multicast Manager 2.3.3
1-22
Configuration Check
Figure 1-12.
Chapter 1 Using the Cisco Multicast Manager
OL-7348-01