Table of Contents
Advertisement
STEP 1
Unpack the TV and accessories. The accessories packed with
TV include
the Universal
Remote, the four AAA batteries,
an
antenna
adapter,
and an AV jack for plugging
your camcorder
or other
audio/video
component
into the front
of the TV.
Make sure to locate the Connections
Foldout.
IMPORTANT
I N FORMATION:
OPTIONAL
STAND
FOR TABLE MODEL
TVS ONLY
CAUTION:
Matching
standswere
designed
to be used with
specific 25-inch and larger table model TVs. All recommended
stands come with hardware to secure your TV to the stand
so that it cannot be easily pulled off, pushed off, or tipped
over. Your television
dealer can help you choose an appro-
priate stand.
If you choose
not to use a recommended
stand
for
your TV: Make Sure that the stand or other furniture
on
which you place the TV is properly
located and of adequate
size and strength. This will help prevent the TV from acci-
dentally being pulled off, pushed off, or tipped over. Fail-
ure to use a proper
stand could cause damage to the TV
and/or personal
injury.
STEP 2: CONNECTING
YOUR TV
If you're
only going to connect
the TV to your home antenna
or cable box, use the "TV Only" connection
shown below.
If
you're
going to connect
the TV to a VCR, laser disc player or
other
component,
we recommend
you use the Connections
Foldout.
The Connections
Foldout details ten diagrams
that are
recommended
for hooking
up the TV to a cable box or antenna,
one or two VCRs, a laserdisc player, and a DSS® receiver.
ONLY
This is a basic connection from an antenna
or cable box to
your TV. Connect
the cable as shown.
If you have a VCR or
other
components
to connect
to the TV, skip to the top of the
next page.
CABLE BOX
out
IF_._
0R_ANTENNA
L
R _
_
,
ANTA
v_eoz
_
Advertisement
Table of Contents
