RCA F27741 Owner's Manual page 45

Parent Approved Use the up and down arrows to
choosewhether the channel indicated should be shown
when the Parental Control feature is turned on. Select YES
to indicatethat the channel can be shown at any time,
regardless of whether Parental Control is turned on. Select
. • .
.. ,,.'NO tO indicate that the front panel cannot tune to that
,:. _-.channel when Parental Control is turned on. Important:
--,- .- You must turn.on the Parental Control feature ON in the
" -.: _ Parental Control control panel (see above).
AutoChannelSearch Displays a control panel that lets you
tellthe TVto searchautomatically for all the channels
" availablethroughthe antenna input(s). When the TV finds an
active channel, it places it in the channel list; inactive
channels (weak stations or channels with no signal at all) will
be removed from the channel list.
Auto Tuning, Displays a choice list that lets you set up TV to
automatically tune to the correct input channel when you
press VCR1, VCR2.LD, or DSSoCABLE.
Set VCR 1 Channel. Displays a choice list that lets you
select the channel that the TV tunes to when you press
the VCR1 button. The choices are:
Not Connected Choose this if you do not have a VCR
connected to an antenna or Video input on the back of
the TV, or if you don't want the TV to tune to a channel
when the VCR1 button is pressed.
Channel 3 Antenna A Choose this if your VCR is
connected to the Antenna A jack on the back of the TV,
and ,you want the TV to tune to channel 3 when you press
the VCR1 button. Reminder: Make sure the VCR's Ch 3/4
switch is set to channel 3.
Channel 4 Antenna A Choose this if your VCR is
connected to the Antenna A jack on the back of the TV,
and you want the TVto tune to channel 4 when you press
the VCR1 button. Reminder: Make sure the VCR's Ch 3/4
switch is set to channel 4.
Video,1 Input Choose this if your VCR is connected to
the Video 1 jacks on the back of the TV and you want the
TV to tune to Video I input when you press the VCR1 button.
Video 2 Input Choose this if your VCR is connected to
the Video 2 iacks on the back of the TV and you want the
TV to tune to Video 2 input when you press the VCR1 button.
I Auto Tuning is part of the inter- |
active setup routine. For more,
J
see Interactive Setup, p. 15.
43