Setthe Vcr1 Channel - RCA F27741 Owner's Manual

SETTHE VCR1 CHANNEL
The fourth step lets you set the VCR1 channel. When you set
the VCR1 channel, you're telling the TV what channel to tune
to when you press the VCR1 button on the remote,
Forexample, if you have a VCR connected to the Video 1
input jacks on the back of the TV, you want the TV to tune to
the Video 1 input channel when you press the VCR1 button.
If you don't have a VCR1 component connected to the TV, skip
this step or select Not Connected from VCR1 Channel choice
list. (For more, see Auto Tuning, page 43.)
1. Press MENU to bring up the VCR 1 choice list.
2. Point tO thechoice that matchesthe way you have your
VCR connected to the TV.:
If you used the Connections Foldout to hook up your TV,
usethe table shown at the right to select the VCR1 channel.
3. Press MENU t0continue.
If you used
Connection A
Connection B
Connection C
Connection
D
Connection E
Connection F
Connection G
Connection H
Connection I
Select
Video I Input
Video I Input
Video I Input
Video i Input
Not Connected
Not Connected
Video 2 Input
Ch3 Antenna A*
Video 2 Input
* Or Ch4 Antenna A, depending on how
yourVCR's 3t4 switch is set.
19