Audio Menu - RCA F27741 Owner's Manual

AUDIO MENU
Mute Press MENU to turn the TV audio off or on.
Tone Controls Displaysthe slider controls for adjusting the
TV's Treble, Bass, Balance, and Volume.
Audio Processor Displays a choice list of the available
audio modes, which control theway the sound comes through
your speakers.
Mono Plays the sound in mono only. Use this setting
when receiving broadcasts where the distance makes the
signal weak.
Synthetic Stereo Takes a mono audio signal and
enhances it to sound more like it has stereo separation.
Stereo' Splits the incoming stereo audio signal into left
and right channels. Most TV programs and recorded materials
have stereo audio. The TV displays the word STEREO when
you tune to a program that is broadcast in stereo.
(e) Sound Logic Stereo (SLS) Evens out sudden
fluctuations in volume. Commercials, for example, often
sound louder than regular programming. SLS keeps your
ears from being blasted by the increased volume.
(e) SRS Stereo (e) SRS* is an audio processing
technology that adds greater depth and stereo separation
to stereo audio signals.
Enhanced SRS Stereo Enhances the SRSsignal to give the
impression of even greater depth and stereo separation.
SAP (Second Audio Program} Plays the program's audio
in a second language, if one is available. The TV displays
the word SAP when you tune to a program that is broadcast
with SAP information. SAP audio is broadcast in mono.
SAP in Synthetic Stereo Enhances the mono SAP (Second
Audio Program) to sound like it has stereo separation.
Speakers Displays a choice list that lets you turn the TV's
internal or external speakers on or off.
*SRS and the SRS symbol (-) are registered trademarks of SRS Labs, Inc.
You may notice that fewer
Audio Processor options are
available when you're tuned to
a video input than when you're
watching broadcast channels.
For more on the menus, see
Using the Menu System, p. 7.
38