ProScan PS27125 User Manual page 22

CANCEL
9,
Select Cable Box Output Channel
Enter the channel you normally use to view channels through your
cable box--usually 3 or 4. Consult your cable box's instruction
book or your cable company if you are not sure. Choose 0 to use
VIDEO INPUT I.
The last series of screens asks about your VCR setup.
NO
Do you have a VCR?
I 0. Select YESif you have a VCR, or NO if you do not.
Answering NO automatically skips forward to the end of TV GUIDE
Plus+ setup,
CANCEL EXIT
Tune VCR to 2 and turn it off
Enter VCR brand # from
brand table in your manual
1I. Tune your VCR to channel 2 and turn it off.
12. Enter the code for your VCR's brand from the table on the
following pages.
%
Channels 0-7 can be used for the |
cable box's output channel. "0" is
used for VIDEO INPUT I (INPUT 2
cannot be used); I-7 are regular TV
channels.
See Advanced Features for more details
on using the TV GUIDE Plus+ system to
control a cable box and VCR,
20