Cleaning And Storing - Electrolux Z1660 Owner's Handbook Manual

Exhaust filter
1. Open the air-outlet grille by pressing down on the grille latch and pull it
out.
2. Remove the exhaust filter and replace it with a new one.
3. Close the air-outlet grille.
Caution: Do not immerse the cleaner, in water or other liquids.
Do not wash the dust container in the dishwasher.
Do not use abrasive materials or solvents to clean the appliance as they
may damage the surface finish.
1. Allow the appliance to cool down before cleaning.
2. Empty the dust container and ensure that the filters are cleaned.
3. Wipe the exterior of the appliance and the dust container with a damp
cloth and then wipe it dry.
On model Z1660 (supplied with caddy fitted to
telescopic extension tubes) the combination
upholstery \ brush nozzle can be stored by
attaching it to the caddy.
Note: The cleaner can be stored either horizontally or in an upright
position.
With the hose and the extension tube attached to the combination floor
nozzle, slide the parking clip of the floor nozzle onto one of the two parking
positions on the cleaner.

CLEANING AND STORING

9