Selecting Accessories - Electrolux Z1660 Owner's Handbook Manual

When finished cleaning, switch off the cleaner before rewinding the
electrical cord. Unplug the cleaner from the wall socket and press the
cord rewind pedal. Hold the plug with one hand and guide the electrical
cord with the other hand to prevent it from striking you or the cleaner.
Combination floor nozzle
The combination floor nozzle can be set for hard
floors or carpets. Press the foot operated toggle
lever on the floor nozzle to select the desired setting.
When the floor nozzle is set for hard floors, the bristles
will extend beyond the base of the floor nozzle. When
the floor nozzle is set for carpets, the bristles will be retracted.
Combination upholstery and brush nozzle
This nozzle can be used for upholstery or brushing.
To clean upholstery, open the two flaps on the nozzle
and attach it with the bristle side facing the extension
tube.
To use the brush side of the nozzle, close the two flaps and attach the
nozzle to the extension tube.
Combination crevice nozzle and dusting brush
This nozzle can be used as a crevice nozzle or as
a dusting brush. To select the desired setting rotate
the end of the nozzle to change from crevice nozzle
to dusting brush.
The crevice nozzle can be used for cleaning crevices, corners, between
cushions or difficult to reach places. The dusting brush can be used to
clean furniture, books, lamp shades and shelves.

SELECTING ACCESSORIES

6