Table of Contents
Advertisement
2.1 LED Definitions
LED
Status
Green
Blinking
LAN
Off
Green/Yellow
PLC
Off
Green
PWR
Off
Note: The device will enter standby mode, and all LEDs will extinguish, after
5 seconds without any data transfer, including when the Ethernet cable is
disconnected. The Power LED will flash once every 15 seconds.
Chapter 2: About the Product
Description
LAN port connected
LAN activity (transferring data)
LAN port not connected
The green indicator turns on and the yellow indicator
blinks slowly when the device is detecting a
powerline link.
The green indicator turns on and the yellow indicator
blinks quickly to indicate data is being transferred
over the powerline link.
No other PLC device detected
Powered on
Powered off
3
Advertisement
Table of Contents
