Chapter 6: Powerline Network Management With Group Button; Forming A Homeplug Av Logical Network - Edimax HP-5101AC User Manual

Powerline adapters

Hide thumbs Also See for HP-5101AC:

Table of Contents

Chapter 6: Powerline Network Management with Group Button

This section demonstrates how to add or remove devices from a powerline network

with the "Group/Reset" button.

6.1 Forming a HomePlug AV Logical Network

When two devices with different group keys are connected to the same powerline and

you want them to form a logical network, follow the following procedures:

Step 1 Press and hold the "Group/Reset" button on adapter A for less than 3 seconds. The

Power LED will start to blink.

Step 2 Within 120 seconds after the Power LED starts blinking on adapter A, press the

"Group/Reset" button on adapter B for less than 3 seconds.

Step 3 Wait for the connection to be established.

Table of Contents