3.3 Creating an Encrypted Powerline Network with Two Adapters
Once both adapters have been successfully connected, press the "Group/Reset" button
of each adapter for less than 3 seconds within 2 minutes. The adapters will
automatically generate a random password to encrypt the powerline network.
Note:
To add additional adapters into the encrypted powerline network or to remove
an adapter from the powerline network, please refer to the Chapter 6 in the
manual
If the powerline adapter in your network does not feature a "Group/Reset" or
an "Encrypt" button, you can use the utility software as an alternative. For
more details please refer to Chapter 5 in the manual.
7