6.3 Leaving a Network & Joining another Network
If you want to remove a powerline adapter from an existing network and add it to
another network, follow the following procedures:
Step 1 Press the "Group/Reset" button on the adapter to be removed (adapter B) for 5~8
seconds.
Step 2 Wait for adapter B to be disconnected with adapter A & C.
Step 3 Press the "Group/Reset" button on an adapter in another network (adapter D) for
less than 3 seconds. The Power LED will start to blink.
Step 4 Within 120 seconds after the Power LED starts blinking on adapter D, press the
"Group/Reset" button on adapter B for at least 3 seconds.
Step 5 Wait for the connection to be established.
23