Installation
clearances
•
The location must be large enough to allow the washer door
to be fully opened,
•
Additional spacing should be considered for ease of
installation and servicing,
•
Additional clearances might be required for wall, door, and
floor moldings.
•
Additional spacing of 1 in. (2.5 cm) on all sidas of the washer
is recommended to reduce noise transfer.
•
Companion appliance spacing should also be considered.
Washer Dimensions
27"
50_'
(68.6 cm)
38"
[g6.5 cm)
Recommended installation spacing for custom
undercounter installation
The dimensions shown are for the recommended spacing.
Custom undorcounter installation - Washer only
++n
i
i I
1,
27,
1,
_°=_ -'_-_ + _._--'_ _,=-I
Recommended installation spacing for recessed or
closet installation, with or without a pedestal
The dimensions shown are for the recommended spacing.
Recessed area or closet installation
481n'_ *
t310 cm2)
2411, 2'
tlss_m'l
._
1I"I<, m+_" : _ +' I_
t2,,s_ m_m) pn.?_m)
j 17.8cm)
J7,6 cm)
1
2
1. Side view - closet or confined area
2. Closet door with vents
Recessed or closet installation - Washer on pedestal
1
2
1. Recessed area
2, Side view- closet or confinedarea
Recommended installation spacing for recessed or
closet installation, with stacked washer and dryer
The dimensions shownare for the recommendedspacing.
45 in. 2 *
(310_m2)
0
-M
24
in. 2 *
(155 cm 2 )
3"(7.6crn)
r
3"(7.6crn)
_
1' (2.5 crn)
6" _
cm)
76"
(193 crn:
_J
5,+,..++. 5557:+
(14 cm)
.
.
*Min. top and bottom air openings for closet doo_
Ex-temalexhaust elbow requires additional space.
***Wall,door and floormolding may require
additional spacing.