Advertisement
Curtains,
sllp4:over=
• Draperies,
slipcovers
• Sheers, some
syntheticcurtains
• Bonded or
laminated fabdcs
Diapers,
baby
clothe=
Remove drapery weights and hooks before laundering.
1. Use lowest temperature or an Air setting.
2. Leave room in dryer for load to fluff.
3. Remove from dryer while slightlydamp. Do not overdry.
For slipcovers, replace slipcoverswhile still slightlydamp. They will dry to
fit tightly.
Dry only a few minutes.
Do not overdry or tumble in high heat. Overdrying loosens the adhesive
and causes fabrics to separate.
Wash and dry small items in a mesh bag or pillowcase for convenient
handling.
1. Dry according to fabdc and cycle settings listedon your controlpanel
page (pages 12-16).
2. Remove diapers and cotton knit items while still slightlydamp. They
will feel softer, shrink less and be easier to fold.
Elastic
Rents
Dry at lowest temperature setting. Remove from dryer while still slightly
damp.
Fiberglass
Do not machine wash or dry fiberglass materials. Small particles can stick
mat=dale
to fabricswashed or dried in followingloads and cause skin irritation.
Flame-
Some items have been treated with a flame-retardant finish to improve
retarclant
their resistanceto burning. Such items are clearly labeled. To retain
finishes
flame-retardant qualitiesthrough continuoususe and washing, clean and
dry according to the manufacturer'sinstructions.
Happed
Dry separately or with similar colors to avoid lint transfer. Follow care
Rams
label directions.
• Corduroy,
velveteen
Quilted,
down-
filled items
Snowsuits,
Jackets
• Nylon,
polyester-base
1, Dry according to fabric and cycle settingsshown on your control panel
page (pages 12-16).
2. Remove from dryer while there is stilla trace of moisture.
3. Smooth, reshape and air dry before puttingaway.
Follow care label instructions.
1. Dry one at a time.
2. Remove from dryer and shake or fluff the item during the dryingcycle.
3. Smooth and reshape before puttingaway.
Check label for fiber content, then see your control panel page
(pages 12-16) for cycle and temperature recommendations.
Follow care label directions.
1. Dry garment for about 10 minutes. Remove and turn inside out. Dry for
10 more minutes.
2. Remove from dryer immediately and hang on a non-rustinghanger to
finish drying. This will help eliminate wrinkles.
continued on next page
25
Advertisement
