You should wipe out the dryer drum with a damp cloth before using to remove dust from storing or shipping. Thank you for buying a Whirlpool appliance. Please complete and mail the Owner Registration Card provided with this product.
Important Safety Instructions To reduce the rlsk of fire, electrlcal shock, or Injury to persons when uslng your dryer, follow bask precautions, lncludlng the followlng: Read all lnstructlons before uslng the dryer. NEVER dry items cleaned, washed, soaked in or spotted with wax, paint, gasoline or flammable fluids in the FIRE dryer.
Operating Instructions Starting your dryer Be sure to refer to the chart below and the Dryer Guide for Proper sorting, loading and control setting information before starting your dryer. NOTE: Do not overdry. Overdrying can cause shrinkage, some fabrics. TYPE OF LOAD Cottons and Ilnsns EXTRA HEAVY-Bedspreads,...
Page 5
2. Push Start Button to start 3. To atop and restart the dryer: the door or turn th& Cycle Control Knob to OFF to stop the dryer. Close the door, select a cycle (if necessary) and push the Start Button to restart the dryer.
Operating lnstructlons Continued The REGULAR/PERMANENT PRESS cycle The REGULAFVPERMANENT PRESS helps provide the special Cycle care that cottons, permanent press and synthetic fabrics need. The cycle consists of a timed period of heated drying and a 10 minute cool down period.
The FLUFF AIR cycle Flre Hazard Do not dry plastic or rubber items wlth heat. Use FLUFF AIR cycle, or line dry. Failure to do so could result In flre or damaged i items. The dryer does not heat when the Cycle Control Knob is on FLUFF AIR.
Operating lnstructlons Continued ‘5 / =- \ \ Using TUMBLE PRESS” The TUMBLE PRESS setting removes wrinkles from clothing that has been packed in a suitcase or closet, and from items not removed from the dryer al the end of a cycle. Set the Cycle Control Knob on TUMBLE PRESS.
Caring For Your Dryer Do not run the dryer wlth the lint ecreen loose, damaged, blocked or mleslng. Dolng so can cause overheatlng and damage to both the dryer and fabrics. Cleaning the lint screen The lint screen is located under a lid Clean It before of the dryer.
Carlng For Your Dryer Contlnued cleaning tne aryer interior Electrlcal Shock and Personal Injury Hazard Turn off the electrlcal power before cleaning the Interior. Make sure the dryer Is cool. Failure to do so could result In electrlcal shock or Injury. Flre Hazard Use non-flammable cleaner.
Thermos~ts Heat element Electric dryer wlth back panel removed lgnlter Funnel Gas dryer with lower front acoess panel removed Lint removal Lint can gather inside the dryer and be a fuel for fire. It is recommended lint be removed every 2 to 3 years, or more often, depending on dryer usage.
Page 12
Carlng For Your Dryer Contlnued lgnlter Funnel Gas dryer wlthout lower front accem panel (full-fmnl pfinel removed) wlthout dryer8 IOWW front panel 8cce88 have tl your dryer is gas and does not a tower front access panel: 1. Unplug the power supply cord or turn off the electrical power.
United States. To locate the authorized Whirlpool service company in your area, call our Consumer Assistance Center telephone number (see Step 2) or look in your telephone directory Yellow Pages...
Page 14
If you need FSP replacement parts*... FSP is a registered trademark of Whirlpool Corporation for quality parts. Look for this symbol of quality whenever you need a replacement part for your Whirlpool appliance. replacement parts will fit right and work...
“Service and Assistance” After checking ‘Service and Assistance,’ our Consumer Assistance Center telephone number, l-800-253-1301, anywhere in the U.S. @ Registered Trademark / SM Service Mark of Whirlpool Corporation Part No. 3391374 01991 Whirlpool Corporation DROO parts and repair labor to modifications section of this book.