Page 1
Use& CareGuide Cycle control knob Temperature eelector Start button Unt screen Dryer drum Model and serial number label LARGE CAPACITY A UTOMATIC DRYERS LE5200XT LE5750XM LE5790XS LE5795XP LG5201XT LG5751XM LG5791XS LG5796XP...
Contents Thank you for buying a Whirlpool Page Important Safety Insb'uctlons appliance. Please complete and mail Additional safety instructions the Owner Registration Card provided and your responsibilities ....3 with this producL Then complete the Operating Instructions form below. Have this information ready Starting your dryer ......
Important Safety Instructions • Read all Instru_lone before using • You ,.re req_ons_le for making the dryer. sum that your dryer is installed, repaired and has parts replaced by a • NEVER dry items cleaned, washed, qualified person. soaked in or spoiled with wax, peJnt, •...
Operating Instructions Starting yourdryer Be sure to refer to the chart below and the Dryer Guide for proper sorting, loading and control setting information before starting your dryer. NOTE: Do not overdry. Overdrying can cause shrinkage, static ding, and damage some fabrics.
Page 5
I. Select • cycle by turning the Cycle Control Knob either way. Stop when the indicator on the knob's outer ring points to the cycle and time you want. See pages 6-9 for further cycle information. 2. Set the Temperature Selector on the desiredtemperaturesetting.
Operating I nettuctlons Continued Theautomatic cycles The automatic cycles allow you to select the degree 04 dryness you prefer for the clothes being dried. The automatic DRY-MISERPcontrol is a thermostat that senses the dryer air temperature. The dryer automati- (:ally shuts off when the selected dryness is reached.
TIMEDDRYING Use the TIMED DRYING cycle for any load you want to dry by time. Turn the Cycle Control Knob to the number of minutes you want from 10 to 60. The last 5 minutes of this cycle are without heat to help make the load easier to handle.
Operating In_bru_ _lnued UsingTUMBLE PRESS ® For ell models (except LE5200XT and LG5201XT): The TUMBLE PRESS setting removes wdnkles from clothing that has been packed in a suitcase or closet, and from items not removed from the dryer at the end of a cycle. 1.
UsingDAMPDRY For ell models (except LE5200XT and LG5201XT): Use this setting todry damp items or to leave wet items damp. (Heavy cottons, for example, axe easier to press when damp and do not become stiff.) 1. Set the Cycle Control Knob on DAMP DRY in the TIMED DRYING cycle.
Cadng For Your D ryer Product lind Fabric Damage Hazard Do not run the dryer with the lint icreen Iooee, damaged, blocked or mlmdng. I_lng so can _tme overheating and damage to both the dryer end fabrics. Cleaning Ihelint screen The lintscreen islocatedundera lid on top of the dryer.Clean It before each load.
Cleaning the dryer Electrical Shock and Peramnal Injury Hazard • Turn off the olecb'loal power before cleaning the Interior. • Make sure the dryer Is cooL Failure to do am could ruult ok_:trlr,,el shock or kl_ry. Fire Hazard • Use non-flammable cleaner.
Caring For Your Dryer Continued Lintremoval Lint can gather inside the dryer and be a fuel for fire. It is recommended the lint be removed every 2 to 3 years, or more often, depending on dryer usage. Cleaning should be done by a qualified person.
Page 13
RqHnOVO R If your dryer I1 gas Ind hu I lull front before opening lop pilel, remove irontpill mi Ionom: 1. Unplug the power supply cord or turn off the electrical power. 2. Open lint screen lid. Remove two screws in lint screen area. 3.
United States. To locate the authorized • Is the lint screen clean? See page 10 Whirlpool service company in your area. for cleaning instructions. call our Consumer Assistance Center • Is the exhaust duct or outside...
Page 15
FSP is a registered trademark of • Contact the Major Appliance Whirlpool Corporation for quality parts. Consumer Action Panel (MACAP). Look for this symbol of quality when- MAC/Ida is a group of independent ever you need a replacement part for consumer experts that voices your Whirlpool appliance.
Whirlpool. E. Repairs to parts or systems caused by unauthorized modifications made to the appliance. WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or oonsequential damages so this limitation or exclusion may not apply to you.
Need help?
Do you have a question about the LE5200XT and is the answer not in the manual?
Questions and answers