Advertisement
Using
end of cycle
signal
and
FINISH
GUARD
• cycle
selector
(on some models)
If your model has an End of Cycle signal and
FINISH GUARD cycle selector, these features
may be turned on or off. Followthese
instructions:
NOTE: The FINISH GUARD cycle operates at
the end of your automatic cycle unlessyou
have turned it off.
If your modol hans a Imob selector:
The top setting refers to the End of Cycle signal
and the bottom setting refers to the FINISH
GUARD cycle.
Position 1:
End of Cycle signal and FINISH GUARD cycle
turned off.
Position 2:
End of Cycle signal tumed off and FINISH
GUARD cycle turned on.
Position 3:
End of Cycle signal turned on and FINISH
GUARD cycle turned off.
Position 4:
End of Cycle signal tumed on and FINISH
GUARD cycle turned on.
For example, both features are off when the
knob isturned to the far left. Both features are
on when the knob is turned to the far right.
If your model has a CLEAN TOUCH" selector:
• You may select the FINISH GUARD cycle and/
or End of Cycle signal by touchingON for the
desired feature.
• Touch OFF if you do not desire the feature(s).
PeeiUen I
P_dtion 3
Pouition 2
Position 4
11
Advertisement
