Whirlpool LE5200XT Use & Care Manual page 5

I. Select • cycle by turning the Cycle
Control Knob either way. Stop
when the indicator on the knob's
outer ring points to the cycle and
time you want. See pages 6-9 for
further cycle information.
2. Set the Temperature Selector on
the desiredtemperaturesetting.
3. Push the Start Button to start the
dryer.
To stop end restart the dryer
• Open the door or turn the Cycle
Control Knob to OFF to stop the
dryer.
• Close the door, select a cycle (if
necessary) and push the Start
Button to restart the dryer.
The Cycle Control Knob should point
to an OFF area when the dryer is not
in use. If the dryer is stopped before
the cycle is finished, turn the Cycle
Control Knob to an OFF area.
5