The Oven Light(S) - Whirlpool RBS240PD Use And Care Manual

The oven light(s)
The oven light(s) will come on when you
open the oven door. To turn the light(s) on
when the oven door is closed, press the
Oven Light Pad _ on the control panel.
Models with rear lights:
1. Disconnect appliance at the main power
supply.
Electrical Shock Hazard
• Make sure oven and light bulb are
cool and power to the oven has been
turned off before replacing the light
bulb.
• The light cover must be in place when
using the oven. The cover protects
the bulb from breaking, and from high
oven temperatures. Because the light
cover is made of glass, be careful not
to drop it.
Failure to follow the above could result
in electrical shock, burns, or injuryfrom
broken glass.
To replace an oven light:
Models with side lights:
1. Disconnect appliance at the main power
supply.
2. Remove glass light cover by grasping
rear or back edge of cover and pulling it
away from the side wall of the oven.
3. Remove the light bulb from its socket.
Replace the bulb with another halogen
bulb (12 volt, 5 watt maximum, available
at most hardware stores).
4. Replace the light cover by snapping it
back into wall. Reconnect appliance at
main power supply.
2. Remove the glass bulb cover in the back
of the oven by screwing it out counter-
clockwise.
3. Remove the light bulb from its socket.
Replace the bulb with a similar 125-volt,
15-watt appliance bulb.
__ jf
©
4. Replace the bulb cover by screwing it in
clockwise. Reconnect appliance at the
main power supply.
NOTE: The oven light(s) will not work during
the Self-Cleaning cycle.
41