Whirlpool RBS240PD Use And Care Manual page 25

5. Set start time.
Press the "up" (A) or "down" (V) pad(s)
until the correct time shows on the display.
Example at right shows a desired start
time of 2 o'clock.
PRESS
mN
YOU SEE
6. Press Stop Time pad.
PRESS
(example shows 2 o'clock start
time)
YOU SEE
7. Set stop time.
Press the "up" (,&) or "down" (V) pad(s)
until the correct time shows on the display.
Example at right shows a desired stop
time of 2:30. This provides a 30-minute
cook time (the difference between the
start and stop times).
PRESS
Z_ Z_
r-II-1
lVllVJ
YOU SEE
(example shows 2:30 stop time)
8. Complete entry.
NOTES:
• You can change the temperature or
time settings any time after pressing
the Start/Enter pad by repeating Steps
2 through 8.
• The display will show "door' and the
heating elements will not heat if the door
is open when you try to bake/roast.
PRESS
YOU SEE
9. When start time is reached:
A 1-second tone will sound. The display
will count down the baking/roasting time in
hours and minutes (if cook time is more
than one hour) or in minutes and seconds
(if cook time is less than one hour),
YOU SEE
(display counts down cook
time)
continued on next page
25