Whirlpool RBS240PD Use And Care Manual page 19

3. Set temperature (optional).
Do this step if you want to set a tempera-
ture other than 350°F. Press • to raise the
temperature or • to lower the temperature
in 5°F amounts. Use these pads until the
desired temperature shows on the small
display. (If the Temp pads are held down
the temperature will change faster.)
PRESS YOU SEE
(example shows Bake at 375°F)
4. Press Cook Time pad.
PRESS YOU SEE
5. Set cook time.
Press the "up" (•) or "down" (•) pad(s)
until the correct time shows on the display.
PRESS YOU SEE
6. Start oven.
NOTES:
• You can change the temperature or
time settings any time after pressing the
Start/Enter pad by repeating Steps 2
through 6.
• The display will show "door" and the
heating elements will not heat if the door
is open when you try to bake/roast.
• When you press the Start/Enter pad,
the display will count down the baking/
roasting time in hours and minutes (if
cook time is more than one hour) or in
minutes and seconds (if cook time is less
than one hour).
PRESS
(example shows 30-minute
baking/roasting time)
YOU SEE
7. When baking/roasting is done:
The oven will turn off automatically and
beep four times. You will also hear four
1 -second tones every minute until you
press the Off/Cancel pad.
NOTE: To disable reminder tones, press
and hold the Cook Time pad for 5 seconds.
To reactivate tones, repeat this step.
(display counts down
cook time)
YOU SEE
continued on next page
19