Application's Authentication Settings - D-Link DES-6500 - Switch User Manual

Application's Authentication Settings

This window is used to configure switch configuration applications (console, Telnet, SSH, web) for login at the user level and at
the administration level (Enable Admin) utilizing a previously configured method list. To view the following window, click
Security Management > Access Authentication Control > Application Authentication Settings:
The following parameters can be set:
Parameter
Application
Login Method List
Enable Method List
Click Apply to implement changes made.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Figure 7- 10. Application's Authentication Settings window
Description
Lists the configuration applications on the Switch. The user may configure the Login Method
List and Enable Method List for authentication for users utilizing the Console (Command Line
Interface) application, the Telnet application, SSH and the Web (HTTP) application.
Using the pull down menu, configure an application for normal login on the user level, utilizing
a previously configured method list. The user may use the default Method List or other Method
List configured by the user. See the Login Method Lists window, in this section, for more
information.
Using the pull down menu, configure an application for normal login on the user level, utilizing
a previously configured method list. The user may use the default Method List or other Method
List configured by the user. See the Enable Method Lists window, in this section, for more
information
193