D-Link DES-6500 - Switch User Manual page 218

SSL Status
Cache Timeout (60-
86400)
NOTE: Certain implementations concerning the function and configuration of SSL are not
available on the web-based management of this Switch and need to be configured using
the command line interface. For more information on SSL and its functions, see the
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI, located on the
documentation CD of this product.
NOTE: Enabling the SSL command will disable the web-based switch management. To
log on to the Switch again, the header of the URL must begin with https://. Entering
anything else into the address field of the web browser will result in an error and no
authentication will be granted.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Use the pull down menu to enable or disable the SSL status on the switch. The default is
Disabled.
This field will set the time between a new key exchange between a client and a host using
the SSL function. A new SSL session is established every time the client and host go through
a key exchange. Specifying a longer timeout will allow the SSL session to reuse the master
key on future connections with that particular host, therefore speeding up the negotiation
process. The default setting is 600 seconds.
Configuration
203