Verify The Radios Are Ready To Be Activated; Activating The Radio; Figure 8-4. Lock Activation Page - Garmin GRT 10 Transceiver Instructions Manual

8.1 Verify the Radios are Ready to be Activated

If the radio is inactivated and working properly the GTN 725/750 will display the free-to-air channels,
which are channel 0 (Radio ID) and channel 1 (XM Preview). If you can see the free-to-air channels and
can hear channel 1, you are ready to activate your radios.

8.2 Activating the Radio

Make sure to be specific for requesting a DATA ONLY service under the Data Radio ID
and an AUDIO ONLY service under the Audio Radio ID. Most SiriusXM receivers in
the market have both audio and data services under one ID. The GDL 69 Series will not
function correctly with both an audio and a data service activated under one ID.
During the activation process do not change channels or pages during this time.
The GTN will need to be on the GDL 69 or GDL 69A Unit Status page, as shown in Figure 8-1, when
you call for activation. Call 1.800.985.9200 and the SiriusXM operator will ask you for your Data Radio
and Audio Radio ID. Activation should begin once the SiriusXM operator has all your information.
During activation the Weather Products section of the Status page will show the various weather products
being activated. The activation process is not complete until a valid service class is shown. Once
activation has been completed, verify that the Subscription Level and Weather Products shown are the
services that you purchased. If you are satisfied that you received the product you requested, touch the
'Menu' key. This will bring up a small inset window as shown in Figure 8-4. Touch the 'Lock Activation'
key to lock in your subscription.
190-00355-04
Rev. K
NOTE
NOTE

Figure 8-4. Lock Activation Page

GDL 69/69A XM Satellite Radio Activation Procedures
Page 33