Sharp BD-HP20U Operation Manual page 47

SETTINGS
iiii3} ic:::: ¸ }
i °i °
{ i¸1111;¸i¸3
@
iYi!!T ' _'iIX
This function allows software updates by
inserting a USB memory device with the update
file into the SERVICE terminal on this player.
Regarding how to obtain the software
update file, please call t-800-BE-SHARP.
CAUTION
o De not remove the USB memory device or
unplug the AC cord while the software is
being updated.
2
3
4
Insert the USB memory device with
the update file into the SERVICE
terminal on rear of this player.
Press SETUP to display the SETUP
MENU screen.
Press A/T/4/I_ to select
"SETTINGS", then press ENTER.
Press A/V to select "SOFTWARE
UPDATE", then ENTER.
• If you alreadyset the password, go to
step 6.
7
During the data checking,
"Checking" blinks.
The current version of this unit software
and the version of the update file on
the USB memory device are displayed.
To update this player software with
update file, select "YES", and press
ENTER.
If the USB memory device is not
properly installed or the correct update
file cannot be found on the USB
memory device, an error message is
displayed.
Check the file on the USB memory
device, and then reinsert the USB
memory device correctly.
5 Enter the 4-digit number using 0-9.
6 Press ENTER to start checking data
in the USB memory device.
(_ - 45